OPI-3601
Specifications Manual
5
4. Detailed View
Figure 1: Detailed View of OPI-3601
No Name Description
1 Trigger Key
By pressing this key, the scanner starts taking an image from the scanning
window and LED illumination is emitted to read 1D/2D codes.
2 Scanning Window
Light paths of the imager, LED illumination and LED aiming. Ensure that
the lens is not exposed to dust and dirt before scanning.
3 Status LED The operating statuses are indicated by different colors.
4 Buzzer Hole
A sound from a built-in buzzer comes out through these holes. When they
are covered, the buzzer sound may not be able to be heard. The sound
varies depending on the status. Buzzer settings can be configured in
various ways: enable or disable buzzer as well as change the loudness and
duration.
1
2
3
4
To Next Page
Loading...
