EasyManua.ls Logo

Opticon OPI-3601 - 12. Regulatory Compliance; 12.1. LED Safety; 12.2. EMC; 13. RoHS

Opticon OPI-3601
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPI-3601
Specifications Manual
31
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept
any interference received, including interference that may cause undesired operation.
12. Regulatory Compliance
12.1. LED Safety
IIEC 62471-1:2006 Exempt Risk Group
12.2. EMC
EN55022
EN55024
FCC Part 15 Subpart B Class B
VCCI Class B
13. RoHS
The OPI-3601 is compliant with RoHS.
RoHS: The restriction of the use of certain hazardous substances in electrical and electronic
equipment, 2002/95/EC
14. Reliability
MTBF (Mean Time Between Failures) 47,480 hours
Note: The reliability of the OPI-3601 is guaranteed as far as it is operated under normal operating conditions in the
range of advised operating temperature and without excessive electrical or mechanical shock.
15. Precautions
Handle this product carefully. Do not deliberately subject it to any of the following.
(1) Shock
Do not drop from the non-standard height.
Do not swing around the cable.
Do not place any heavy items on the scanner.
Do not squeeze it between any heavy items.
(2) Temperature Conditions
Do not use the scanner at temperatures outside the specified range.
Do not pour boiling water on the scanner.
Do not throw the scanner into the fire.
Do not bend cables forcibly at low temperatures.
(3) Foreign Materials
Do not put the scanner into water.
Do not put the scanner into chemicals.
(4) Others
Do not plug/unplug the connectors when the laser beam is emitted.
Do not disassemble this product.
Do not use the scanner near a radio or a TV receiver. It may cause reception problems.
The scanner may be damaged by voltage drops caused by lightning.
The scanner may not perform properly in environments when placed near a magnetic material.
This is a Class B product, to be used in a domestic environment, based on the Technical
Requirement of the Voluntary Control Council for Interference from Information Technology
Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it
may cause radio interference.

Table of Contents

Related product manuals