optris LS – E2006-01-A
31
M
EASUREMENT
C
ONFIGURATION
The menu item [Menu: Measurement\ Settings] opens the following dialog:
Max. data count Limitation of the maximum
number of data values – when
achieved the measurement
will be stopped
Memory Memory, calculated from the
max data count value (will
also be displayed in the
status line)
Recording interval Time between single data [1ms...10s]
Recording time maximum time of measurement, calculated from Max data count and
Recording interval
A change of the parameter Max data count will have influence on the Memory and Recording time.
A change of the parameter Recording interval will have influence on the Recording time only.
To Next Page
Loading...
