Oracle Database Appliance User Manual

Install Processor (CPU)
100 Oracle Database Appliance Service Manual • February 2016
Caution - Equipment overheating.Whenever you remove a heatsink, you should replace it
or install a CPU filler before you return the server to operation; otherwise, the system might
overheat due to improper airflow.
Install Processor (CPU)
1.
Attach an antistatic wrist strap.
See “Performing Electrostatic Discharge and Antistatic Prevention Measures” on page 34.
2.
Unpack the replacement CPU.
The CPU replacement kit includes a new CPU, wipes, and a tube of thermal grease.
3.
Install the CPU.
a.
Grasp the sides of the CPU firmly with your thumb and index finger, tilt it at
a 45 degree angle, orient it with the socket alignment tabs [2], carefully lower
the end of the CPU with the alignment tabs into the socket [3], support the

Oracle Database Appliance Specifications

General

Product Type	Database Appliance
Form Factor	Rack-mountable
Storage Type	SSD
RAID Support	RAID 1, RAID 5, RAID 6, RAID 10
Storage Expansion	Yes
Maximum Disk Drives	Varies by model (e.g., 12, 18, 36)