Oracle Database Appliance User Manual

Install Boot Disk Backplane Cables
Chapter5 • Servicing FRUs 131
b.
Disconnect the power cable and HDD cables from the boot disk backplane
[2].
Install Boot Disk Backplane Cables
1.
Reconnect the power cable and hard disk drive (HDD) cables.
a.
Reconnect the power cable and HDD cables to the boot disk backplane [2].
b.
Reconnect the power cable and HDD cables to the motherboard [1].
2.
Return the server node to operation.
a.
Install the server node top cover.
See “Installing the Server Node Top Cover” on page 139.
b.
Install the server node into the system.
See “Installing a Server Node Into the System Chassis” on page 140.
c.
Power on the server node.
See “Powering On Oracle Database Appliance (Original Version)” on page 142.

Oracle Database Appliance Specifications

General

Product Type	Database Appliance
Form Factor	Rack-mountable
Storage Type	SSD
RAID Support	RAID 1, RAID 5, RAID 6, RAID 10
Storage Expansion	Yes
Maximum Disk Drives	Varies by model (e.g., 12, 18, 36)