Oracle Database Appliance User Manual

Power On Oracle Database Appliance (Original Version)
Chapter6 • Returning Oracle Database Appliance to Operation 143
■
Using the server node's Power button. Momentarily press and release the
recessed Power button on the front panel [1].
On the server node, the green Power/OK LED [2] blinks while the server node is booting,
and remains steady on when the server node is operational.
■
Using the Oracle ILOM web interface:
a.
Open a browser and enter the server node's service processor IP
address in the browser's address field.
b.
At the log in page, type a user name (the account must have Reset and
Host Control (r) privileges) and password, and click the Log In button.
c.
Go to Remote Power Control and select Power On from the Select
Action list box and then click Save and OK.
On the server node, the green Power/OK LED [2] blinks while the server node is
booting, and remains steady on when the server node is operational.
■
Using the Oracle ILOM CLI:
a.
Log in to Oracle ILOM using an ssh client. Type:

Oracle Database Appliance Specifications

General

Product Type	Database Appliance
Form Factor	Rack-mountable
Storage Type	SSD
RAID Support	RAID 1, RAID 5, RAID 6, RAID 10
Storage Expansion	Yes
Maximum Disk Drives	Varies by model (e.g., 12, 18, 36)