Power On Oracle Database Appliance (Original Version)
144 Oracle Database Appliance Service Manual • February 2016
$ssh username@sp_ip_address
Where username is a user account name with Reset and Host Control (r) privileges
and sp_ip_address is the IP address of the server node service processor.
b.
When prompted, enter the user account password.
c.
Enter the command to power on the server node:
-> start /SYS
On the server node, the green Power/OK LED [2] blinks while the server node is
booting, and remains steady on when the server node is operational.
To Next Page
Loading...
