Determining SCSI Device Parameters on Linux
C-2 Oracle Secure Backup Installation and Configuration Guide
■ The value for Lun is the SCSI LUN. For example, in this output the SCSI LUN of
both tape devices is 0.
By convention, the tape library and tape drive can each be assigned 0 as the Oracle
Secure Backup logical unit number.
Based on the output shown in Example C–1, Table C–1 summarizes the tape device
information for storabck05.
Table C–1 storabck05 Device Summary
Device
Host Bus
Adapter
SCSI bus
address Target ID SCSI LUN
Library 0 0 2 0
Tape drive 0 0 4 0
To Next Page
Loading...