Orion AGB-21G - Checking the Transmission

4 - 60
CHECKING THE TRANSMISSION
1. Measure:
main axle runout
(with a centering device and dial gauge
1
)
Out of specification
Replace the main
axle.
Main axle runout limit
0.02 mm
2. Measure:
drive axle runout
(with a centering device and dial gauge
1
)
Out of specification
Replace the drive
axle.
Drive axle runout limit
0.02 mm
3. Check:
transmission gears
Blue discoloration/pitting/wear
Replace
the defective gear(-s).
transmission gear dogs
Cracks/damage/rounded edges
Replace
the defective gear(-s).
4. Check:
transmission gear engagement
Incorrect
Reassemble the transmission
axle assemblies.
5. Check:
transmission gear movement
Rough movement
Replace the defective
part(-s).
6. Check:
circlips
Damage/bends/looseness
Replace.
TRANSMISSION DEVICE,SHIFT DRUM ,GEAR FORKS