Orion AGB-21G - Rear Brake Pad Inspection and Replacement

3 - 14
REAR BRAKE PAD INSPECTION AND REPLACEMENT
REAR BRAKE PAD INSPECTION AND
REPLACEMENT
1. Inspect:
Brake pad thickness A
Out of specification m Replace as a
set.
2. Replace:
Brake pad
Brake pad thickness:
4 mm
<Limit>: 1.0 mm
Brake pad replacement steps:
Remove the Screw 1 and 2.
Loosen the Caliper
Remove the Nut 3.
．
Reeplace the Brake pad.