3 - 6
THROTTLE CABLE ADJUSTMENT/
THROTTLE LUBRICATION
THROTTLE LUBRICATION
1. Remove:
Screw (throttle grip cap)
2. Apply:
Lithium soap base grease
On the throttle cable end
3. Install:
Screw (throttle grip cap)
T
R
.
.
4 Nm (0.4 m · kg)
AIR FILTER REPLACE
NOTE:
Proper air filter maintenance is the biggest key
to preventing premature engine wear and
damage.
CAUTION:
Never run the engine without the air filter
element in place; this would allow dirt and
dust to enter the engine and cause rapid
wear and possible engine damage.
1. Remove:
Screw