3-21
CHECKING THE FUSES
CAUTION:
NOTE:
CHECKING THE FUSE
The following procedure applies to all of the
fuses.
To avoid a short circuit, always turn the main
switch to “OFF” when checking or replacing
a fuse.
Check:
fuse
a. Connect the pocket tester to the fuse and
check it for continuity.
Set the pocket tester selector to “7
1”.
b. If the pocket tester indicates “d”, replace the
fuse.
REAR SHOCK ABSORBER INSPECTION
1. Inspect:
Swingarm smooth action
Abnormal noise/unsmooth action m
Grease the pivoting points or repair the
pivoting points.
Damage/oil leakage m Replace.
REAR SHOCK ABSORBER INSPECTION