4 - 45
MAGNETO AND STARTER GEAR
NOTE:
50 Nm (5.0 m kg)
NOTE:
INSTALLING THE GENERATOR ROTOR
1. Install:
1
starter wheel gear
2
woodruff key
3. Install:
generator rotor
1
Clean the tapered portion of the crankshaft
and the rotor hub.
When installing the rotor, make sure the wood-
ruff key is properly seated in the key way of the
crankshaft and turning the starter wheel gear
clockwise.
4. Tighten:
generator rotor
2
Tighten the bolt while holding the generator ro-
tor with the sheave holder .
2. Install:
starting motor drive chain ①
drive gear ②
cirlip ③
bolt ④
chain protect plate ⑤
To Next Page
Loading...