Orion AGB-21G - Installing the Rear Shock Absorber Assembly

5-40
REAR SHOCK ABSORBER AND SWINGARM
40 Nm(4.0 m • kg)
NOTE:
4. Check:
drive chain rollers
1
Damage/wear Replace the drive chain.
drive chain side plates
2
Damage/wear Replace the drive chain.
Cracks
Replace the drive chain and make
sure that the battery breather hose is proper-
ly routed away from the drive chain and be-
low the swingarm.
5. Lubricate:
drive chain
Recommended lubricant
Engine oil or chain lubricant
suitable for non-O-ring chains
6. Check:
drive sprocket
rear wheel sprocket
More than 1/4 tooth
a
wear
drive chain sprockets as a set.
Bent teeth
Replace the drive chain
sprockets as a set.
b
Correct
1
Drive chain roller
2
Drive chain sprocket
INSTALLING THE REAR SHOCK ABSORB-
ER ASSEMBLY
1. Install:
rear shock absorber assembly
When installing the rear shock absorber assem-
bly, lift up the swingarm.