Orion AGB-21G - Removing the Generator Rotor

4 - 43
MAGNETO AND STARTER GEAR
NOTE:
REMOVING THE GENERATOR ROTOR
1. Remove:
bolt
1
(magneto)
Loosen the bolt (generator rotor)
1
while
holding the rotor with a sheave holder
2
.
Do not allow the sheave holder to touch the
projection on the rotor.
2. Remove:
generator rotor
1
woodruff key ②
CHECKING THE STARTER CLUTCH
1. Check:
1
starter clutch drive gear
2
starter clutch gear
Burrs/chips/roughness /wear
Replace
the defective part(-s).
3. Remove:
circlip
1
bolt ②