4 - 11
CYLINDER HEAD
REMOVING THE CYLINDER HEAD
2. Align:
“I” mark
a
on the generator rotor (with the
stationary pointer
b
on the crankcase cov-
er)
a. Turn the primary pulley counterclockwise.
b. When the piston is at TDC on the compres-
sion stroke, align the “I” mark
c
on the cam-
shaft sprocket with the mark
d
on the cylin-
der head.
3. Loosen:
Bolt
1
1. Remove:
Long Bolt A
4. Remove:
Bolt
2
Nut B
To Next Page
Loading...