5 - 5
FRONT WHEEL AND REAR WHEEL
ASSEMBLY AND INSTALLATION
Front wheel
1. Install:
Bearing (left) ①
Middel spacer ②
Bearing (right) ③
Oil seal ④
NOTE:
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
Use a socket that matches the outside diam-
eter of the race of the bearing.
Left side of bearing shall be installed first.
Install the oil seal with its manufacture’s
marks or numbers facing outward.
Do not strike the inner race of the bearing.
Contact should be made only with the out-
er race.
2. Install:
Brake disc ①
Bolt (brake disc) ②
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
Collar
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
4. Install:
Wheel
NOTE:
Install the brake disc ① between the brake pads
② correctly.
12 Nm (1.2 m • kg)
CAUTION:
①
Collar (left) ⑤
Collar (right) ⑥
To Next Page
Loading...