5 - 22
FRONT BRAKE AND REAR BRAKE
4. Install:
[Front]
Diaphragm
Brake master cylinder cap ①
Screw (brake master cylinder cap) ②
[Rear]
Diaphragm
Brake master cylinder cap ①
Bolt (brake master cylinder cap) ②
ACHTUNG:
CAUTION:
After installation, while pulling the brake
lever in or pushing down on the brake
pedal, check whether there is any brake
fluid leaking where the union bolts are
installed respectively at the brake master
cylinder and brake caliper.
T
R
.
.
2 Nm (0.2 m · kg)
T
R
.
.
2 Nm (0.2 m ·
kg)
To Next Page
Loading...