2 - 7
MAINTENANCE SPECIFICATIONS
Piston pin bore inside diameter 14.002 ~ 14.013 mm 14.04 mm
Piston pin outside diameter 13.994 ~ 14.000 mm 13.98 mm
Piston rings:
Top ring:
----lerraBepyT
Dimensions (B s .980)T s 2.00mm ----
mm52.0~01.0)dellatsni(pagdnE 0.60 mm
Side clearance (installed) 0.040 ~ 0.080 mm 0.12 mm
2nd ring:
----repaTepyT
Dimensions (B s 98.0)T s 2.20 mm ----
mm03.0~51.0)dellatsni(
pagdnE 0.60 mm
mm080.0~040.0ecnaraelcediS 0.12 mm
Oil ring:
Dimensions (B s 29.1)T s 2.45 mm ----
mm05.0~02.0)dellatsni(pagdnE ----
Crankshaft:
Crank width “A” 40.15~ 40.20 mm ----
Runout limit “C” 0.03 mm 0.05 mm
Big end side clearance “D” 0.15 ~ 0.35mm 0.60 mm
Small end free play “F” 0.4 ~ 1.0 mm 2.0 mm
timiLdradnatSmetI
7
%
B
T
B
T
To Next Page
Loading...