Monitor Settings
34
Figure 5.2-16 LUT List
Tap one user LUT ID in the list to choose it as the designated LUT
slot.
Then, it will pop up a prompt for reminding you overwriting operation
for LUT file, as shown in Figure 5.2-17, tap
Confirm
button and then
select the target LUT from SD card in the next popup window, as
shown in Figure 5.2-18, the file should be a LUT file with “.cube”
suffix, and specify its storage directory, please don’t cut off the power
during loading.
Figure 5.2-17 Prompt for Overwriting LUT
To Next Page
Loading...
