2. Set Anamorphic Ratio
This feature enables you to de-squeeze signals coming from camera
utilizing anamorphic lenses that may not have a built-in de-squeeze
feature of their own.
The valid area which will fill the screen is controlled by the ratio
selection, tap
Anamorphic
Ratio
item to cycle through these
anamorphic ratios: 1.33X, 1.4X, 1.5X, 1.6X, 1.8X, 1.9X, 2X. There
will be black blank area at the surrounding of the image.
For example, the resolution of the input and output are as shown in
Table 6.1-3:
Table 6.1-3 Resolution Relationship Between Input and Output
To Next Page
Loading...
