OTC DTX-3000 AC/DC - Page 34

Operation
34
DTX-2200-3000 AC/DC
5A) BALANCING of the TIME (t) (-35-+10)
It allows you to adjust the time (t) the positive or negative electrode stays in place
independently, guaranteeing
perfect control of penetration and cleanliness, drastically reducing side incisions.
Display - +
-35 85% 15%
Display - +
0 50% 50%
Display - +
+10 40% 60%
Push the BALANCING and FREQUENCY key (T4) once and use the ENCODER Knob (E) to regulate the
value indicated on the DISPLAY (D).
LED L30 switched on and flashing.
To exit, simply push the BALANCING and
FREQUENCY (T4) key again (BALANCING LED off).