○ Toggle On Release
○ Mute Instant
○ Mute On Release
WORKFLOW
● Lock root and scale during playback. If activated, the scale and the root won’t be modifiable
during playback to avoid unintentional changes.
● Confirm scale change and quantize. This setting is thoroughly explained in the Scale section.
● Lock sequence steps with preview ON. If activated, Disables entering or removing steps from
the sequence when Preview is enabled. This allows for example in multitrack mode, that if you
created a customized layout of steps with different notes and velocities, you can trigger samples on
a drum machine without deactivating the steps.
● Euclidean push encoder to apply. Explained in the Euclidean Generator section.
● Track select priority in multitrack. Explained in the Track Selection section.
● Reset step parameters when clearing. The new entered notes or chords will have default values
instead of the previous ones. This affects only the modes Mono, Chords and Multitrack. In Poly
mode the new steps are always reset.
● Default Velocity value. Default Velocity value of new notes and the keyboard.
● Default Gate value. Default Gate value of the new notes and the keyboard arpeggiator.
SYSTEM
● LEDs Animations. Set the amount of fading and other LED effects.
● LEDs Brightness. Two level brightness setting.
● LEDs Transport bar keyboard. Show the transport bar in the keyboard view, it will always be
shown if recording is activated.
● Power-Off Autosave. Save automatically the loaded patterns and project.
● Bluetooth ON/OFF.
● USB Mode
○ Device: OXI One acts as a USB MIDI Device getting power from the USB.
○ Host+Power: OXI One acts as a USB MIDI Host providing power to other USB devices.
○ Host No Power: OXI One acts as a USB MIDI Host without providing power. Required by some
USB adaptors.
○ Device Self Powered: OXI One acts as a USB MIDI Device without getting power from the USB
outlet. This avoids possible ground loops caused by the USB supply. Reconnect the USB cable
for this to take effect.
● MIDI IN Monitor. Incoming MIDI data monitor. new
● FW & HW Version. Displays firmware, hardware and BLE versions.
● RESET. Resets OXI One to factory settings while maintaining calibration settings.
To Next Page
Loading...