Panasonic AV-HS450E - Setting the GPI

143
5. System settings
5-7-3. Setting the GPI
The user can set the functions that are to be controlled from the GPI ports and set whether to enable the control.
 Refer to “6-2-4. TALLY/GPI” and “6-3-1. TALLY/GPI”.

Press the [CONFIG] button to light its indicator and display the CONFIG menu.
 Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the sub menu corresponding to the TALLY/GPI connector concerned and set the function
to be controlled by the GPI port.
TALLY/GPI connector of mainframe:
GPIM-In sub menu and GPIM-Out sub menu
<Menu display>
CONFIG 4
|
Port
|
Assign
| |
GPIEN
GPIM-In | —|NoAsign| |Disable
Port1-8 Enable
CONFIG 5
|
Port
|
Assign
| |
GPIEN
GPIM-Out| —|NoAsign| |Disable
Port1
|
Port31
Enable
TALLY/GPI connector of control panel:
GPIP-In sub menu and GPIP-Out sub menu
<Menu display>
CONFIG 6
|
Port
|
Assign
| |
GPIEN
GPIP-In | —|NoAsign| |Disable
Port1-8 Enable
CONFIG 7
|
Port
|
Assign
| |
GPIEN
GPIP-Out| —|NoAsign| |Disable
Port1-8 Enable

Turn [F2] to select the port to be controlled using the Port item.

Turn [F3] to select the function to be assigned using the Assign item.
 Refer to “Control using the GPI input port” and “Output from the GPI output port”.

Turn [F5] to set enable or disable for the control to be exercised from each port using the GPIEN item.
Enable: Control is enabled.
Disable: Control is disabled.
 Settings for the GPIEN item can be assigned to one of the user buttons.
 See “5-3-1. Setting the user buttons”.