Panasonic AV-HS450E - Page 151

151
5. System settings
Camera’s menu operations
The camera’s menu displays, the movements of the cursor displayed on the menus and the entry of the changes
made can be performed from the unit.

Press the [CAM] button to light its indicator and display the CAM menu.
 Refer to “2-1-5. LCD menu area”.

Turn [F1] to display the CamMenu sub menu.
<Menu display>
CAM 3
|
CTL
|
C-Menu↓
|
Item
|
Val/Y/N
CamMenu | 1| —| —| —
1-5 On
Off
Cursor Cursor

Turn [F2] to set the camera to be controlled using the CTL item.

If the camera’s menus are to be displayed, turn [F3] to select On, and then press the [F3] switch.
If they are not to be displayed, turn [F3] to select Off and then press the [F3] switch.

The cursor displayed on the camera’s menus can now be moved by turning [F4].
Turn [F4] clockwise to move the cursor down or counterclockwise to move it up.

Turn [F5] clockwise to move to the camera’s setup screen.
Operation of [F5] in the setup screen
Selecting Yes/No:
Turn clockwise to select “Yes (confirmed)” and turn counterclockwise to select “No (unconfirmed)”.
Changing values:
Turn clockwise to increase and turn counterclockwise to decrease.