179
Chapter 7 Program Destinations/Program Keys
10
To enable sub-addressed routing,
enter a sub-address, and then select
“OK”.
z This screen appears when the Function
Parameter “152 Sub-Addr Routing” (Fax/
Email Settings > Fax Parameters) has been
set to “Valid”.
11
To enable routing by the sender’s
numeric ID, enter the numeric ID, and
then select “OK”.
z This screen appears when the Function
Parameter “153 TSI Routing” (Fax/Email
Settings > Fax Parameters) has been set to
“Valid”.
z To register another fax number, repeat steps
5 to 11.
z Press the Reset key to return the machine
to the initial screen of the currently active
mode.
To Next Page
Loading...
