Panasonic DP-MB251CX - Page 91

12.1.7 USB print features
Feature Code Selection
Number of copies
in USB print
#660 To set the number of copies to print.
1. MMENUN A MBNM6NM6NM0N A MSETN
2. Enter the desired number of copies from “01” to “99”, using the dial keypad.
R The default setting is “01”.
3. MSETN A MMENUN
Recording paper
orientation in USB
print
#661 To set the recording paper orientation.
M1N “PORTRAIT” (default)
M2N “LANDSCAPE”
Note:
R See page 41 for details.
N in 1 setting in
USB print
#662 Using this feature, you can save paper by printing 2, 4 or 8 pages onto 1 page.
The documents’ size will be reduced to fit the recording paper.
M0N “OFF” (default)
M1N “2 in 1”
M2N “4 in 1”
M3N “8 in 1”
Note:
R See page 41 for details.
N in 1 page border
in USB print
#663 To select whether or not to print a line between the pages in N in 1 printing.
M0N “NONE” (default)
M1N “SOLID LINE”
Note:
R See page 41 for details.
Duplex in USB
print
#664 To select whether to print pages in duplex and also select the type of binding.
M0N “OFF” (default)
M1N “LONG EDGE”
M2N “SHORT EDGE”
Note:
R See page 41 for details.
Continuous in
USB print
#665 To select whether documents in different file formats are printed onto 1 page when
using layout printing and duplex printing.
M0N “DISABLED”
M1N “ENABLED” (default)
Note:
R See page 41 for details.
Input tray in USB
print
#669 To set the input tray to use for USB print.
M1N “#1” (default): Standard input tray
M2N “#2”: Multi-purpose tray
M3N “#3”: Lower input tray
M4N “#1+#2+#3”, “#1+#2”, “#1+#3” or “#2+#3”
*1
*1 These options are displayed only when the paper size (feature #380 on
page 74, feature #381 on page 75 or feature #382 on page 75) and the media
type (feature #383 on page 75, feature #384 on page 76 or feature #385 on
page 76) match. If either is changed, this setting will be changed accordingly.
91
12. Programmable Features