<TX side signal> <RX side signal> <Countermeasure>
2nd / 3rd DCS / Training & delayed CFR / FTT at TX side
2nd / 3rd EOP / EOM / MPS
& delayed MCF / PIP / PIN / RTP /
RTN
at TX side
delayed DCS & 2nd / 3rd / --- DIS at RX side
(Fig. e)
6.6.5.1.6. THE UNIT CAN COPY, BUT THE TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT
(Long distance or international communication operation)
This symptom highly depends on the transmission and reception capability of the other FAX unit
and the line conditions.
The countermeasures for this unit are shown below.
Transmission Operation:
Set the transmitting speed to 4800BPS (service mode: code No. 717) or select the overseas mode.
Reception Operation:
If 80% or more of the reception is incorrect, set the receiving speed to 4800BPS. (Service mode:
code No. 718)
109
To Next Page
Loading...
