Panasonic KX-FP342CX

Code Function Set Value
Effective
Range
Default Remarks
718 Receive speed selection
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1~4 1
Adjusts the speed to start
training
during FAX reception.
Refer
RECEIVE PROBLEM () and
THEUNIT
CAN COPY, BUT THE
TRANSMISSION
AND RECEPTION IMAGE
ARE
INCORRECT().
722 Redial tone detect 1:ON 2:
OFF
1, 2 1 Sets the tone detection
mode
redialing.
745 Power ON film feed 1:ON 2:
OFF
1, 2 1 When the power is turned
on,
is wound to take up any
slack.
763 CNG detect time for
friendly reception
1:10 sec
2:20 sec
3:30 sec
1~3 3 Selects the CNG detection
tone
friendly reception.
771 T1 timer
1:35 sec
2:60 sec
1, 2 1 Sets a higher value when
the
response from the other
party
more time during FAX
transmission.
774 T4 timer X 100
msec
00~99 00 Use this function when
delay
in the line and
communication
Mobile comm) does not
work
815 Sensor & Vox check
See TEST FUNCTIONS ().
852 Print test pattern
See TEST FUNCTIONS ().
853 Top margin 1~9
5
----------
874 DTMFontime 060~200ms 060~200 090 ----------
875 DTMFofftime 060~200ms 060~200 085 ----------
880 History list
See HISTORY().
881 Journal 2 list
See PRINTOUT EXAMPLE ().
882 Journal 3 list
See PRINTOUT EXAMPLE ().
6.3. TEST FUNCTIONS
The codes listed below can be used to perform simple checks of some of the unit’s functions.
When complaints are received from customers, they provide an effective tool for identifying the
locations andcauses of malfunctions. To do this, you set the Service Mode (Refer to OPERATION
()) first, then operate the below test items.
68