Panasonic KX-FP342CX

Code Function Set Value
Effective
Range
Default Remarks
593 Time between CED and
300bps
1:75 msec
2:500
msec
3:1 sec
1~3 1
See Symptom/
Countermeasure
for long distance and
international
calls in THE UNIT CAN
COPY,
CANNOT EITHER
TRANSMIT
RECEIVE LONG
DISTANCEOR
INTERNATIONL
COMMUNICATIONS
Refer to RECEIVE
PROBLEM
THE UNIT CAN COPY, BUT
CANNOTEITHER TRANSMIT
/
LONG DISTANCE OR
INTERNATIONL
COMMUNICATIONS().
594 Overseas DIS detection
select
1:detects
at the 1st
time
2:detects
at the 2st
time
1, 2 1
See Symptom/
Countermeasure
for long distance and
international
calls in THE UNIT CAN
COPY,
CANNOT EITHER
TRANSMIT
RECEIVE LONG
DISTANCEOR
INTERNATIONL
COMMUNICATIONS
Refer to SOMETIME THERE
IS
TRANSMIT PROBLEM ()
and
UNITCAN COPY, BUT
CANNOT
EITHER TRANSMIT/
RECEIVE
DISTANCE OR
INTERNATIONL
COMMUNICATIONS().
595 Receive error limit value set X Number
of times
001~999 100
Sets the number of
acceptable
lines when the FAX
reconstructs
received data. Refer to
RECEIVE
PROBLEM().
596 Transmit level set X dBm - 15~00 -10
Selects the FAX
transmission
Refer to SOMETIME THERE
IS
TRANSMIT PROBLEM ()and
RECEIVEPROBLEM().
598 Receiving sensitivity 43= -43
dBm
20~48 40
Used when there is an
error
Refer to THE UNIT CAN
COPY,
CANNOT EITHER
TRANSMIT
RECEIVE LONG DISTANCE
OR
INTERNATIONL
COMMUNICATIONS
599 ECM frame size
1:256 byte
2:64 byte
1, 2 1 ----------
717 Transmit speed selection
1:9600BPS
2:7200BPS
3:4800BPS
4:2400BPS
1~4 1
Adjusts the speed to start
training
during FAX transmission.
Refer
SOMETIME THERE IS A
TRANSMIT
PROBLEM () and THE UNIT
CAN
COPY, BUT THE
TRANSMISSION
RECEPTION IMAGE ARE
INCORRECT
().
67