disturb the network condition of the device.
3.3. INSTALLATION
3.3.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
- Avoid excessive heat or humidity.
- Use the unit within the following ranges of temperature and
humidity.
- Ambient temperature: 5°C to 35°C
- Relative humidity: 20% to 80% (without condensation)
- Power cord length should be less than 5 meters. Using a longer
cord may reduce the voltage or cause malfunctions.
- Avoid direct sunlight.
- Do not install near devices which contain magnets or generate
magnetic fields.
- Do not subject the unit to strong physical shock or vibration.
- Keep the unit clean. Dust accumulation can prevent the unit from
functioning properly.
17
To Next Page
Loading...
