Panasonic KX-FP342CX

Contact Image Sensor (CIS)
Printer Type:
Thermal Transfer on Plain Paper
Data Compression System:
Modified Huffman (MH), Modified READ (MR), Modified Modified
READ (MMR)
Modem Speed:
9,600/7,200/4,800/2,400 bps; Automatic Fallback
Operating Environment:
5—35°C, 20—80 % RH (Relative Humidity)
Dimensions:
Approx. height 185 mm × width 355 mm × depth 275 mm
Mass (Weight):
Approx. 3.4 kg
Power Consumption:
Standby: Approx. 4.0 W
Transmission: Approx. 12 W
Reception: Approx. 40 W (When receiving a 20% black document)
Copy: Approx. 55 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)
Power Supply:
220-240 V AC, 50/60 Hz
Memory Capacity:
Approx. 25 pages memory transmission
Approx. 28 pages memory reception
(Based on ITU-T No. 1 Test Chart in standard resolution.)
*
1
Transmission speed depends upon the contents of the pages, resolution, telephone line
conditions and capability of the other party’s machine.
*
2
Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode. (Refer to ITU-
T No.1 TEST CHART ().) If the capability of the other party'smachine is inferior to your unit, the
transmission time may be longer.
Note:
- Any details given in these instructions are subject to change
without notice.
- The pictures and illustrations in these instructions may vary slightly
11