Panasonic KX-FP342CX

3Press [SET].
To correct a mistake
Press [ ] or [ ] to move the cursor
to
incorrect character, and make the
correction.
To delete a character
Press [ ] or [ ] to move the cursor
to
character you want to delete and press [
STOP]
To insert a character
1. Press [ ] or [ ] to move the cursor
to
position to the right of where you
want
insertthe character.
2. Press [MUTE] to insert a space and
enter
character.
4Enter your logo, up to 30 characters, using the
dial keypad.
Example: “BILL“
1. Press [2] 2 times.
-Cursor ( ) will appear on the display.
2. Press [4] 3 times.
3. Press [5] 3 times.
4. Press [ ] to move the cursor to the next space and press [5] 3
times.
5Press [SET].
-The next feature will be displayed.
6Press [MENU].
Note:
- You can enter your logo by pressing [+] or [-] in
step 4. In this case, press [ ] to move the cursor.
3.3.7.1. TO SELECT CHARACTERS WITH THE DIAL KEYPAD
Pressing the dial keys will select a character as shown below.
26