4
Open the back cover ( ).
Remove the ink film ( ).
5
Clean the thermal head ( ) with a cloth
moistened with isopropyl rubbing alcohol, and
let it dry thoroughly.
Caution:
To prevent a malfunction due to static
electricity, do not use a dry cloth and do not
touch the thermal head directly.
6Reinstall the ink film and close the co vers. (See
step 4 to 6 ) / Refer to INSTALLING THE INK FILM
()
7Clnnect the power cord and the telephone line
code.
5. DISASSEMBLY INSTRUCTIONS
Before disassembling, remove the Ink film.
44
To Next Page
Loading...
