Panasonic KX-HTS32 - Page 58

Screen / Tab Setting item Description Input Type Note
Please retype your
password
To enter the same
password again to
reconfirm.
Text Router
Pwd2
This feature is
available when PPPoE
is selected in WAN
Type.
Service Name PPP Service Name
(optional)
Text
Router2
This feature is
available when PPPoE
is selected in WAN
Type.
Access
Concentrator
Name
PPP Access concentrator
Name (optional)
Text
Router2
This feature is
available when PPPoE
is selected in WAN
Type.
Relay LAN site
PPPoE session
This feature allows to
enable/disable a PPPoE
relay session.
Check This feature is
available when PPPoE
is selected in WAN
Type.
MTU:(1400-1500) To enter the maximum
transfer unit size of
PPPoE frames.
Unsigned
Number
This feature is
available when PPPoE
is selected in WAN
Type.
PPP Option Choose the option form
the drop down list. The
available options are, Auto
Connect, Dial-On-Demand
and Manual Connect
Select This feature is
available when PPPoE
is selected in WAN
Type.
Maximum Idle
Time
To enter the maximum idle
time.
Text
Numeric
This feature is
available when Dial-
On-demand(DoD) is
selected in PPP
Option.
Available values: 0 -
99999
Static DNS This option allows the user
to configure primary/
secondary DNS servers of
this WAN connection.
Check When this feature is
set to ON, the address
of the DNS server
received from PPPoE
server is not available.
Primary DNS
Server
Specifies the primary DNS
server for the WAN.
IP Address This feature is
available when ON is
selected in Static DNS.
If the address of the
primary DNS server is
received from PPPoE
sever before
specifying, it is
displayed as default.
3.2.1 Network Configuration—[3-1] WAN—WAN Setting
58 Programming Item List