Panasonic KX-HTS32 - Page 59

Screen / Tab Setting item Description Input Type Note
Secondary DNS
Server
Specifies the secondary
DNS server for the WAN.
IP Address This feature is
available when ON is
selected in Static DNS.
If the address of the
secondary DNS server
is received from
PPPoE sever before
specifying, it is
displayed as default. If
only the address of the
primary DNS server is
received from PPPoE
sever before
specifying, it is
displayed as default.
Option—SIP QoS-
DSCP
Selects the SIP QoS-
DSCP.
Select
• DSCP value is
specified according
to the value set for
each protocol of the
WAN port of
KX-HTS series. In
case of using an
existing LAN,
consult your
network
administrator. In
case of using a SIP
trunk, consult your
SIP service
provider.
• For DSCP value
settings for KX-HDV
series, KX-NTV
series and general-
purpose SIP phones
connected to the
same network, refer
to the
corresponding
manuals.
Option—RTP QoS-
DSCP
Selects the RTP QoS-
DSCP.
Select
Option—Video
QoS-DSCP
Selects the video QoS-
DSCP.
Select
Option—Others
QoS-DSCP
Selects the Others QoS-
DSCP.
Select
Option—
Bandwidth
Limitation for
Others
Specifies whether to
enable the bandwidth
limitation.
Select
3.2.1 Network Configuration—[3-1] WAN—WAN Setting
Programming Item List 59