1.3.33 Headset Operation
– Headset Operation
–
Answer/Release Button
Headset Operation
You can have a conversation using a headset.
In this case, you must select "Headset on" in programming mode or set the Headset button
on (red) in advance. However, for the KX-UT113/KX-UT123, Headset mode is enabled
automatically when a headset is connected to the headset jack of the telephone.
This feature is also known as Handset/Headset Selection.
To talk using the headset
PT/KX-UT series
Press SP-PHONE.
To use the handset during a conversation using the headset
To talk in hands-free mode during a conversation using the headset
PT/KX-UT133/KX-UT136/KX-UT248/KX-UT670
Press red Headset.
(Headset)
• The Headset button light shows the current status as follows:
Off: Headset mode off
Red on: Headset mode on
106 Operating Manual Document Version 2014-11
1.3.33 Headset Operation