To create/add to an external message delivery list
PT/SLT/PS/SIP Extn.
Enter 932.
On-hook.
Enter 2 to accept.
2
Log in to your mailbox.
3 29
1
List number 1
List number 2
Enter 1 or 2.
2
Enter the CO line access number
needed for making outside calls.
CO line access no.
Dial the outside telephone number
(including area code if needed).
outside
telephone no.
To store an extension number, simply
enter the extension number
then skip the next step.
State the member’s
name.
Enter 2 to add
the member.
2
Enter 1
to end recording.
1
1
Add more members
End
2
Enter 1 or 2.
OR
To continue
Enter 1.
1
C.Tone
*
OR
• * If you are using an ISDN or SIP line in en bloc dialing mode, to insert a pause or special
command in the middle of the telephone number, pause momentarily while entering the
telephone number. You will hear a list of available options, for example, "To add more digits,
press 4. To insert a pause, press 5.".
To delete members from an external message delivery list
PT/SLT/PS/SIP Extn.
Enter 932.
On-hook.
Log in to your mailbox.
3 29
1
List number 1
List number 2
Enter 1 or 2.
2
1
Delete all members,
then go on-hook
Delete one member
2
Enter 1 or 2.
OR
Enter 2.
2
1
Delete the announced member
Keep the member and
announce the next member
2
Enter 1 or 2.
OR
Repeat this step to delete
other members.
OR
Document Version 2014-11 Operating Manual 215
1.6.4 Sending Messages
To Next Page
Loading...
