To disconnect one party and then talk to the other in a three-party conversation
PT/PS
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
During a conversation
Press
FLASH/RECALL.
Talk.
The other party will be put on hold.
Press the flashing CO, ICD Group,
PDN, SDN, or INTERCOM
corresponding to the original party.
OR
OR
(CO)
OR
(ICD Group)
(SDN)
(PDN)
OR
*
• * In this case, the FLASH/RECALL button on a proprietary telephone must be set to
Flash/Recall mode through system programming.
• During a three-party conversation, pressing the TRANSFER button or Recall/
hookswitch alternates between the two other parties in the conversation.
• You can have a conference with a maximum of eight parties (comprising intercom or
CO lines) simultaneously.
• During a conversation involving four or more parties, you cannot disconnect one party
and maintain the conversation with the other parties.
• Non-KX-UT series SIP phone users cannot originate a conference call, but can be
added as a member.
• When a KX-UT series SIP phone user originates a conference call and one of the other
parties leaves the conference, the KX-UT series SIP phone user will still be able to talk
to the remaining party but will not be able to hold the call.
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Conference button.
Leaving Three-party Conference
The person who originated a conference with two other parties can leave the conference, and allow the other
parties to continue the conversation.
70 Operating Manual Document Version 2014-11
1.3.15 Conference
To Next Page
Loading...
