Telephone Features 3-77
3.2 Telephone Features L
Conditions
• The default is “Log-In” mode.
• There should be at least one extension that is in Log-In mode.
• If every extension has logged out except one person, and that person tries to log out,
their extensions will display “Not Valid”. In other words, the last member of the group
cannot log out.
• The Log-In/Log-Out button can be assigned to a Flexible CO button.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Log-In/Log-Out Button
• System Programming — Installation Manual
[100] Hunting Group Set
[600] Extension Group Assignment
Feature Reference
Station Hunting (→ See the Installation Manual.)
PT
To Next Page
Loading...
