Panasonic KX-TA308 - 2.2 Station Programming (Personal Programming)

Call Waiting Tone Type Assignment
Allows you to select the call waiting tone type (Tone 1 or Tone 2).
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Conditions
• The tone type patterns are described in the Appendix (Section 4).
• The default is “Tone 1”.
Feature References
Busy Station Signaling (BSS)
Call Waiting
PT
Dial 5.
Press STORE.
or
Dial 1 or 2.
1 : to select Call Waiting Tone 1
2 : to select Call Waiting Tone 2
AUTO DIAL
STORE
1 25
• The STORE indicator lights.
• The display shows the initial programming mode.
• The display shows the current tone type.
2-6 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)