Panasonic KX-TA308 - Redial, Saved Number

Telephone Features 3-105
3.2 Telephone Features R
Conditions
• Up to sixty-four digits can be stored and redialed. This does not include an outside
(CO) line access code.
• “ ”, “#”, “PAUSE”, and “INTERCOM” (for secret dialing) are counted as one digit.
• A flexible button can be assigned as the SAVE button.
• You can check the stored number. Press the pre-assigned SAVE button while on-hook,
and the stored number will be displayed.
• You can change the outside (CO) line when dialing. You may press a CO button to
select an outside (CO) line directly after going off-hook before pressing the
pre-assigned SAVE button.
Programming Reference
• Station Programming (Section 2)
Flexible Button Assignment — SAVE Button
PT
PT
PT
PT
PT
Redial, Saved Number
Allows you to save the current external telephone number during a conversation, so that
you can redial the same party later using a simple operation. The saved number can be
redialed until another number is stored.
Storing
PT
Press the Flexible CO button
assigned as the SAVE button.
Press AUTO DIAL/STORE.
During a conversation or while hearing a busy tone
AUTO DIAL
STORE
PT
Press the Flexible CO button
assigned as the SAVE button.
Lift the handset or press
SP-PHONE/MONITOR.
Dialing