Panasonic KX-TA308 - FWD;DND Button; Group-CO (G-CO) Button

2-12 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
FWD/DND Button
(Assignment)
Allows you to assign a Flexible CO button as the FWD/DND button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible CO
button you wish to assign as
the FWD/DND button.
Dial 4.
Press STORE.
4
CO
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming
mode.
<PT Display Example>
FWD/DND
— To exit the Station Programming mode, press the PROGRAM button.
Feature References
Call Forwarding
Do Not Disturb (DND)
Group-CO (G-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Group-CO button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible
CO button you wish to
assign as a G-CO button.
Dial #.
Press STORE.
Enter the outside (CO) line group
(trunk group) number (1 through 3).
outside (CO) line group no.
CO
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
outside (CO) line group number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
TRG GRP–x
<PT Display Example>
TRG GRP–
— To exit the Station Programming mode, press the PROGRAM button.