Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible CO button as a DSS button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
Station Programming (Personal Programming) 2-11
2.2 Station Programming (Personal Programming)
— To exit the Station Programming mode, press the PROGRAM button.
Feature Reference
Intercom Calling
PT
Press the desired Flexible CO
button you wish to assign as
a DSS button.
Dial 1.
Press STORE.
Enter the extension number
(100 through 199).
extension no.
AUTO DIAL
STORE
1
CO
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
EXT–
<PT Display Example>
extension number
• To erase an incorrect entry, press the TRANSFER (CLEAR)
button.
(The TRANSFER button becomes the CLEAR button during
programming.)
EXT–xxx
To Next Page
Loading...
