Panasonic KX-TA308 - Outside (CO) Line Ringing Selection

Station Programming (Personal Programming) 2-19
2.2 Station Programming (Personal Programming)
Outside (CO) Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at
your extension.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press STORE.
Dial 3.
Enter the outside (CO) line numbers
you want to ring (1 through 3).
outside (CO) line no.
3
AUTO DIAL
STORE
<PT Display Example>
RNG:1,2,3
— To exit the Station Programming mode, press the PROGRAM button.
Conditions
• The “Flexible Ringing Assignment” should be set to “Enable”. (Refer to System
Programming.)
• When an outside call is received at extension but doesn’t ring, the CO indicator will
flash. If you want to answer the outside call, press the flashing CO button.
Programming Reference
• System Programming — Installation Manual
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
• The STORE indicator lights.
• The display shows the initial
programming mode.