Panasonic KX-TA308 - Station Programming Data Default Set

Station Programming (Personal Programming) 2-25
2.2 Station Programming (Personal Programming)
Station Programming Data Default Set
Allows you to return each of the following programmable items to their default settings.
a) Call Waiting Tone Type Assignment (default: Tone 1)
b) Intercom Alert Assignment (default: Ring-Calling (Tone Call))
c) Outside (CO) Line Ringing Selection (default: Ring – all outside (CO) lines)
d) Preferred Line Assignment — Incoming (default: Ringing Line Preference)
e) Preferred Line Assignment — Outgoing (default: No Line Preference)
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press STORE.
Dial # .
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming
mode.
• The display shows your jack and extension
number.
<PT Display Example>
Function Clear
— To exit the Station Programming mode, press the PROGRAM button.
Condition
• This feature also cancels the Hands-free Answerback feature and pressing the
AUTO ANSWER/MUTE button in the Room Monitor feature.
Feature References
Hands-free Answerback
Room Monitor