Panasonic KX-TA308 - Caller ID Selection Button

Station Programming (Personal Programming) 2-9
2.2 Station Programming (Personal Programming)
Caller ID Selection Button
(Assignment)
Allows you to assign a Flexible CO button as the Caller ID Selection button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Condition
• System Programming determines who can assign the Caller ID Selection — Common
button.
Programming Reference
• System Programming — Installation Manual
[909] Common Area Call Log Check Assignment
Feature References
Call Information/Log, Incoming
Call Log, Incoming
PT
PT
Press the desired Flexible CO button you wish to
assign as the Caller ID Selection — Personal button.
Dial 7.
Press STORE.
–– Personal
Press the desired Flexible CO button you wish to
assign as the Caller ID Selection — Common button.
Press STORE.
–– Common
Dial 97.
7
7
9
CO
CO
AUTO DIAL
STORE
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial programming mode.
<PT Display Example>
CID-P Selection
• The STORE indicator lights.
• The display shows the initial programming mode.
<PT Display Example>
CID-C Selection