Panasonic KX-TA308 - Single-CO (S-CO) Button

Station Programming (Personal Programming) 2-17
2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button
(Assignment)
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Condition
• You can assign the same outside (CO) line to an S-CO and G-CO button.
PT
Press the desired Flexible
CO button you wish to assign
as an S-CO button.
Dial 0.
Press STORE.
Enter the outside (CO) line
number (1 through 3).
outside line (CO) no.
0
CO
AUTO DIAL
STORE
• The STORE indicator lights.
• The display shows the initial
programming mode.
<PT Display Example>
CO—
<PT Display Example>
outside (CO) line number
• To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
CO—x