Panasonic KX-TA308 - Switching to Tone Alert

3-110 Telephone Features
S 3.2 Telephone Features
Condition
• This feature is not available for rotary telephones.
Programming Reference
• Station Programming (Section 2)
Intercom Alert Assignment
Switching to Tone Alert
“Voice Call” (through the built-in speaker) which is set at the called party’s extension can
be switched to “Tone Call” (ringing). This feature must be set beforehand at the called
party’s extension by Station Programming.
Any Telephone
extension no.
Lift the handset or press
SP-PHONE/MONITOR.
Confirmation tone
Ring back tone
Dial .Enter an extension number
(100 through 199).