Panasonic KX-TA308 - Page 168

3-114 Telephone Features
T 3.2 Telephone Features
Conditions
• Be sure the system clock is set correctly.
• The alarm continues for thirty seconds.
• If you receive an incoming call during the alarm, ringing starts after the alarm stops.
• If the alarm is set to sound during a conversation, the alarm will start after the
conversation.
• If the operator, manager or you set a new time, the preset time will be cleared.
• If an alarm time has not been set, the display will show the following.
Programming Reference
• System Programming — Installation Manual
[000] Date and Time Setting
Feature Reference
Timed Reminder, Remote (Wake-Up Call) (3.3 Operator/Manage Service Features)
Alarm Not Stored
PT
Stopping the alarm
Any Telephone
Lift the handset. Dial tone 3
• Pressing any key also stops the alarm. • This tone confirms that you have a Timed Reminder.
PT
Dial 763#.
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.
367
• If “10:10 AM” has been set:
<PT Display Example>
— one time
or
— daily
Alarm 10:10AM
Alarm 10:10AM
Checking the set time (with a display PT only)